Installation instructions – seat belt buckle emulator BMW 1 and 3 Series and Mini

Seat belt emulator
BMW 1 (E81 E82 E87 E88)
and 3 Series (E90 E91 E92 E93) and Mini

Short installation video:

1. Turn the ignition off.

2. Find a big yellow connector under the seat.

3. Unlock and open this connector.

4. Pull out the plug with the seat belt buckle wires, it is a gray L-shaped plug.

5. Using a small screwdriver, remove the seatbelt buckle wires (black and red) and then insert the seatbelt emulator wires in their place.

After connecting the seatbelt emulator, a car computer “sees” the seat belt as always fastened.