Installation instructions – seat occupancy sensor emulator – Kia Sorento USA

Mat emulator installation
- KIA Sorento USA

1. Turn the ignition off.

2. Under the passenger seat, locate the mat connector with 3 wires: white, red, brown (from the mat side). On the car installation side, the colors of the wires are different.

3. Remove the wires from the mat plug in the car (e.g. using a small screwdriver to press the pins out) and replace them with the emulator wires in the same color order. The seat mat remains disconnected and the emulator is connected in its place.

4. Turn the ignition on and wait for a while.
If the airbag light has gone out by itself, you don’t have to do anything else.
If the indicator does not go out, you need to remove the fault code using an appropriate diagnostic software.

Click on the picture to enlarge

Connected emulator