Mat emulator installation instruction
- USA version Hyundai (Sonata, Accent)
1. Turn the ignition off.
2. Under the passenger side seat find the seat occupancy sensor connector. It looks the same as the emulator plug. The colors of the wires on the side of the seat mat are white, red, brown. On the side of car installation, the wires colors are usually different.
3. Disconnect the seat mat plug and connect the emulator plug instead.
4. Turn the ignition on and wait a moment.
If the warning light disappeared automatically, you don’t have to do anything more.
If the warning light is still on, it is needed to reset the fault code using proper diagnostic software.
The emulator should be connected by a mechanic or a person qualified in the SRS systems.